Documentation > nControl > User's Manual
Track Layout - Keyboard Shortcuts
Track Layout - All Layers
Key Function
+ Zoom in.
- Zoom out.
Home Move the origin of the work space to the upper left corner of the window.
Tables Layer
Key Function
Del Delete the selected table.
R Rotate the selected table 90 degrees.
Base Plate Layer
Key Function
Del Delete the selected base plate.
Enter Toggle the active edge.
R Rotate the selected base plate 90 degrees.
S Toggle show/hide studs.
Tracks Layer
Key Function
Ctlr Add/remove a track segment to the selection by clicking on it.
D Duplicate selected track segments.
Del Delete the selected track segments.
E Explode the selected track segment groups.
Enter Toggle the active connection point.
G Group the selected track segments.
M Merge superimposed nodes and remove isolated nodes.
O Select the origin for the rotation.
R Rotate the selected track segments 22.5 degree about the defined origin.
Shift Draw a box to add track segments to the selection.
Space Toggle the connected edge of the selected track segment.
Arrow Up Increase the minimal height zoom level with one brick.
Arrow Down Decrease the minimal height zoom level with one brick.
Shift + Arrow Up Increase the maximum height zoom level with one brick.
Shift + Arrow Down Decrease the maximum height zoom level with one brick.
Structures Layer
Key Function
Del Delete the selected structure.
R Rotate the structure +90 degree and reposition it so that upper left corner remains on the same location.
] Rotate the structure +1 degree about the initial upper left corner.
[ Rotate the structure -1 degree about the initial upper left corner.
Ctrl+] Rotate the structure +10 degree about the initial upper left corner.
Ctrl+[ Rotate the structure -10 degree about the initial upper left corner.
Documentation > nControl > User's Manual