4DBrix™

Please login into your 4DBrix™ account...

Downloading our models requires being logged in.

Please log in into your account or click the brick to sign-up for free.

Sign Up

Hey, you really seem to like our models
That's awesome!

Click the brick and

Become a member

to support our work for the AFOL community!

Thank you for your interest in our models!

New models are only accessible by our members. After one year, models become available to everybody, for free.

Support from our members is what's making the development and free distribution of our models possible. We're giving our members exclusive access during the first year to thank them for their support and to provide an incentive for non-members to join them in supporting our project.

And yes, that was a hint

Become a member

These models are subject our 3D Print Model User Agreement. In short:

Personal Use

If the tracks are for personal use, you\'re good. You can print tracks, modify the models, etc.

Commercial Use

If you have prior written permission from 4DBrix, you are allowed to 3D print and sell copies of our models.
Any commercial activity based on our models, or models derived from them, with our explicit written consent is not permitted.

Please read the integral 3D Print Model User Agreement before downloading the model.

Do you accept our 3D Print Model User Agreement?

Home > Products > Monorail > Tracks

3.01.012 - Ramp Extension - Long

Introduction

Track 3.01.012 is a long ramp extension. It's designed to fit in between a lower and upper monorail ramp. It increases the ramp with a length of 32 studs (long monorail track) and a height of 10 bricks (one stanchion). The ramp extensions are also interconnectable, so you can add more than one in between the lower and upper ramp.

Length: 32 studs
Width: 4 studs
Height: 10 bricks

3D Models

Monorail Track

Part: 3.01.012
Revision: v18
Release: 04-APR-21
File: 3-01-012_v18.stl (556.7KB)
Suggested Print Settings

Platform: 80°C
Extruder: 235°C
Layer Thickness: 0.19mm
Nozzle Diameter: 0.4mm
Support: 20%
Infill: 30%

Model History

v18: 08-APR-21 - Initial upload.