Control Buttons

Our control buttons are out! All our pre-orders have been processed so they are now available in our web shops.
Click on the video below to see them in action. The panel in this video used 4 Servo Control Buttons to control the track switch motors and boom barriers, a Light Control button to control the level crossing lights and a Power Brick to power the whole system. This system is fully stand alone, so it does not need a computer to run. Just press the green button on the power brick and you're ready to go!

EU Shop

US Shop

More Info

R56 Switches

We also released a set of R56 switches. They allow to make continuous curve switches with a 56 stud radius. The curved part of the switches makes a 36° angle so you'll need three of our R56 curves (track #31) to make a 90° turn.

-We also added a 'quarter R56 curve' to our range of tracks, that's a 4.5° R56 curve. You can use them to connect the switches to R56 track segments that make a 22.5° angle.

EU Shop

US Shop

More Info

Multi-Train Interface & SBrick Support

We redesigned our web interface to control multiple trains using one tablet / phone. Besides the trains, you can of course also control all the other devices in your layout: switches, lights, boom barriers, etc.
We added the following new features:

Touch controls: you can now control the speed of the train by sweeping the power control
Emergency Button: to stop all the trains in case that's needed
Skins: you can chose a custom skin in function of the train you're controlling

In the video below we're using the multi-train control on a tablet to pilot three trains all powered with different controllers:

The horizon express is controlled with a 4DBrix™ WiFi controllers
The cargo train is controlled with a LEGO® PU hub
The passenger train is controlled with an SBrick

Don't hesitate to contact us if you're interested controlling your PU trains, SBrick trains or layout like this!

Contact

Customer Corner

This is an amazing layout made by one of our customers down under. The gate is automated with our nControl™ software. There are two sensors that detect the train. The software uses the sensor feedback to control a continuous rotation servo motor to open/close the gate. This layout will be on display during the BrisBricks Chandler Expo 2019, October 5-7, Brisbane Australia.

Let us know if you're looking to automate your LEGO® layout. We're happy to help you figure out which components you need and give you a hand with the scripting.

Contact

Canada DDP

For shipments to Canada we can now offer a DDP service: Delivered Duty Paid. DDP allows pre-payment of all Canadian duties and taxes for one low flat rate of $5.30 (USD). With Canada DDP, your package is delivered directly to your door without delay, fees upon delivery, or having to go to the Customs Office to pick up your package. To ship your package with Canada DDP, simply add the Canada DDP item to your cart before checking out.

US Shop

LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse our products.
©2019 4DBrix. All rights reserved.

Want to be removed from our mailing list? No problem, click here and we won't bug you again.